Here for sale we have a Patrick Eggle Berlin Pro HT in Sunburst finish. Built in the UK in the early to mid 2000s this guitar features a Mahogany body with a carved Maple top, a Mahogany neck topped with a 24 fret Rosewood fingerboard. This guitar is fitted with a pair of Seymour Duncan humbuckers, wired to a master volume, a 3-way rotary coil split and a 3-way toggle switch.
The gloss finish neck plays well, with a moderate profile to ensure fluid playability. The neck flattens very slightly to the centre to offer both comfortable and ergonomic thumb positioning in all registers. The dual cutaway design gives unobstructed access to the upper register and the combination of the carved top and rear bevel offer a lovely connected feeling, really allowing you to feel the resonance of the wood.
The Dual Seymour Duncan USA humbuckers sound thick and full, with a solid low end, a tight and punchy midrange, along with a clear, articulate top end. The simple control layout provides a comprehensive control of your tone without being intrusive, with the 3-way rotary coil split allowing you to select either the outer/inner coils, along with the full humbuckers in the middle position, this is a great way to access single coil-esque tones, with plenty of voicings to choose from.
Brand - Patrick Eggle
Model - Berlin Pro HT
Finish - Sunburst
Year - Early to mid 2000s
Made In - UK
Body - Mahogany w/ Maple carved top
Neck - Mahogany
Fingerboard - Rosewood
Frets - 24
Scale Length - 25"
Nut Width - 1.69"
Pickups - Seymour Duncan (APH1N (neck), SH11 (bridge)
Controls - Master volume, 3-way rotary coil split (outer coils/full humbuckers/inner coils), 3-way toggle switch
Our ID: 1270223034201
Weight: 7.7lbs
Serial Number: 10286
Aesthetic Condition:
Headstock: Overall good condition, all aspects of the headstock displays light scratching that can be seen under direct light. There is chipping to the finish along the treble edge and the truss rod cover is chipped on the bass side.
Neck: Overall good condition, both treble and bass sides display delamination to the edges of the fretboard, most notably in the upper registers. The rear of the neck displays light scratching and small indentations that can be seen under direct light. The nut displays discolouration. The fingerboard displays light scratching that can be seen under direct light.
Body: Overall good condition, the body displays very small indentations and light scratching that can be seen under direct light, most notably on the bass side shoulder. The edges of the body display chipping to the finish.
Condition of Frets:
This guitar has had a fret level and a re-crown to ensure the best playability possible.
Current Set Up:
Truss Rod Condition: Fully functional & can be adjusted
Hardware Condition: Fully functional with light signs of wear
Structural Condition: No concerns or issues to note
Height of the string from the 12th Fret- Treble 1.75mm - Bass 2mm
Please be aware that the action on a guitar may move slightly in transit and this measurement is the current height.
Strings on Guitar - 10-46
Very slight fret noise can be heard to the treble strings in the upper register, this is less noticeable when amplified.
Electrics:
Full working order
Truss rod tool not included (4mm)
Please be aware that for international buyers import fees are not included in our postage and packaging cost, this only covers the cost of the guitar being sent to you. Import fees will be charged by Customs upon the guitar's arrival in the recipient country. Due to Brexit, this also applies to EU buyers. We advise checking the total import cost with Customs as this is not information we are able to accurately provide.